Free Expert Consultation

Quick Turnaround Shipment

Rosemount 1199 Capillary Level Transmitter

Availability: In stock

Specification

Product feature and capabilities are :

Remote Mount Seals can be used for high temperature applications.
Remote Mount Seals are used on the low pressure side of the transmitter for tunnel-system Assemblies that can be used for DP measurement in closed pr pressurized tank applications
variety of process connection

Description

Rosemount 1199 Remote Mount Steel are used commonly at the top of the vessel when a DP measurement is required.
They are available in three different diameters to optimize time response and reduce temperature effects.

Technical Data-Sheet

1199_Seals.pdf

Configure 1199 Capillary Product

Build Model

Your Model Number:

Required*

Required

Your Model Number:

Attribute

Value

Select value to configure

Welded-Repairable | One or Two Seal System | High Side of Transmitter

Welded-Repairable | One or Two Seal System | Low Side of Transitter

Welded-Repairable | Two Seal System | Ballanced System - Same Seal on Low and High Sede

All Welded | One Seal System | High Side of Transmitter

All Welded | Two Seal System | High Side of Transmitter

All Welded | Two Seal System | Low Side of Transitter

All Welded | One Seal System | High Side of Transmitter (3051S_T, 3051T, 2051T, 2088)

Silicone 200 | 0.93 | -45 to 205 °C (-49 to 401 °F)

Silicone 200 for Vacuum Applications |.93 | For use in vacuum applications below 14.7 psia

Silicone 704 | 1.07 | 0 to 315 °C (32 to 599 °F)

Silicone 704 for Vaccum Applications | 1.07 | For use in vacuum applications below 14.7 (1 bar -a), refer ti vaoir oressyre cyrves ub Rosemount DP Level Fill Fluid Specification Technical Note (00840-2100-4016)

Silicone 705 | 1.09 | 20 to 370 °C (68 to 698 °F)

Silicone 705 for Vacuum Applications | 1.09 | For use in vacuum applications below 14.7 psia

Syltherm® XLT | 0.85 | -75 to 145 °C (-102 to 293 °F)

Inert (Halocarbon) | 1.85 | -45 to 160 °C (-49 to 347 °F)

Glycerin and Water | 1.13 | -15 to 95 °C (5 to 203 °F)

Neobee M-20®| 0.92 | -15 to 225 °C (5 to 437 °F)

Propylene Glycon and Water | 1.04 | -15 to 95 °C (5 to 203 °F)

0.03-in (0,711 mm) ID, SST Armored

0.04-in (1.092 mm) ID, SST Armored

0.075-in (1.905 mm) ID, SST Armored

0.03-in (0,711 mm) ID, SST Armored, PVC Coated with closed end

0.04-in (1.092 mm) ID, SST Armored, PVC Coated with closed end

0.075-in (1.905 mm) ID, SST Armored, PVC Coated with closed end

0.03-in (0,711 mm) ID, SST Armored, 4-in. Support Tube

0.04-in(1.092 mm) ID, SST Armored, 4-in. Support Tube

0.075-in(1.905 mm) ID, SST Armored, 4-in. Support Tube

0.03-in(0,711 mm) ID, SST Armored, PVC Coated 4 in. support tube with closed end

0.04-in(1.092 mm) ID, SST Armored, PVC Coated 4 in. support tube with closed end

0.075-in (1.905 mm) ID, SST Armored, PVC Coated 4 in. support tube with closed end

1 ft (0.3 m)

5 ft (1.5 m)

10 ft (3.0 m)

15 ft (4.5 m)

20 ft (6.1 m)

0.5 m (1.6 ft)

1.0 m (3.3 ft)

1.5 m (4.9 ft)

2.0 m (6.6 ft)

2.5 m (8.2 ft)

3.0 m (9.8 ft

3.5 m (11.5 ft)

4.0 m (13.1 ft)

5.0 m (16.4 ft)

6.0 m (19.7 ft)

25 ft (7.6 m)

30 ft (9.1 m)

35 ft (10.7 m)

40 ft (12.2 m)

45 ft (13.7 m)

50 ft (15.2 m)

7.0 m (23 ft)

8.0 m (26.2 ft)

9.0 m (29.5 ft)

10.0 m (32.8 ft)

11.0 m (36.1 ft)

12.0 m (39.4 ft)

13.0 m (42.6 ft)

14.0 m (45.9 ft)

15.0 m (49.2 ft)

Extended Flanged Seal

RTW

Threaded Seal

SCW

Tri-Clover Style Tri-Clamp Seal

SSW

Tank Spud Style

FCW

Flush Flanged Seal - Ring Type Joint

Hygienic Seal,Thin Wall Tank Spud Seal

EES

Hygienic Seal, Flanged Tank Spud Seal

VCS

Line Tri-Clover Style Tri-Clamp Seal

SVS

Hygienic Seal,Varivent® Compatible Seal

SHP

Cherry-Burrell

SLS

Dairy Process Connection- Female Thread

WSP

Flow-Thru Saddle Seal

UCP-PMW

Male Threaded Pipe Mount Seal & Paper Mill Sleeve

CTW

Chemical Tee Seal

TFS

Wafer Style In-Line Seal

WFW

Flow-Thru Flanged Seal

PFW

Pancake seal

ANSI/ASME B16.5

EN 1092-1 (European Standard)

JIS B2238 (Japanese Industrial Standards)

FFW

Flush Flanged Seal

2 in. | DN 50 | 50A

3 in. | - | 80A

- | DN 80 | -

4 in. | DN 100 | 100A

Class 150 | - | 10K

Class 300 | - | 20K

Class 600 | - | 20K

PN 40 (EN 1092-1) | PN 40 | -

- | PN 10/16 (DN100 only) | -

Class 900 | - | -

Class 1500 | - | -

Class 2500 | - | -

- | PN 64 | -

- | PN 100 | -

- | PN 160 | -

316L SST | 316L SST | CS

316L SST | 316L SST | 316 SST

Alloy C-276 seam welded | 316L SST | CS

Alloy C-276 seam welded | 316L SST | 316 SST

Tantalum | 316L SST | CS

Tantalum | 316L SST | 316 SST

Tantalum-Brazed | 316L SST | CS

Tantalum-Brazed | 316L SST | 316 SST

Alloy C-276, solid faceplate | Alloy C-276/316L SST | CS

Alloy C-276, solid faceplate | Alloy C-276/316L SST | 316 SST

Alloy B | 316L SST | 316 SST

304L SST | 316L SST | 316 SST

Nickel 201 | 316L SST | 316 SST

Alloy 400 | 316L SST | 316 SST

Titanium Grade 4 | Titanium Grade 4 | 316 SST

Titanium Grade 4 | 316L SST | 316 SST

316Ti SST(WNr 1.4571) | 316Ti SST(WNr 1.4571) | 316Ti SST(WNr 1.4571)

Alloy 22 | 316L SST | 316 SST

Duplex 2507 SST | 316L SST | 316 SST

Alloy 600 | 316L SST | 316 SST

Zirconium 702 | 316L SST | 316 SST

None

316L SST

Alloy C-276

Duplex 2505 SST

Titanium Grade 4

Alloy 400

Nickel 201

None

1 (1/4-18 NPT)

2 (1/4-18 NPT)

1 (1/2-14 NPT)

2 (1/2-14NPT)

None

Extra Fill for Cold Temperature Application

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for Flushing Connection(s)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

PTFE Gasket (for use with flushing connection ring)

Barium Sulfate-Filled PTFE gasket

Grafoil® gasket

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

One Piece Design

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

0.002 in. (50 µm) Diaphragm thickness (available with 316L SST and Alloy C-276)

None

Flat Face, Flush Flange

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

25µm (0.001 in) Gold Plated Diaphragm

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

316L SST | 316L SST | CS

316L SST | 316L SST | 316L SST

Alloy C-276 | 316L SST | CS

Alloy C-276 | 316L SST | 316L SST

Tantalum | 316L SST | CS

Tantalum | 316L SST | 316L SST

304L SST | 316L SST | 316L SST

Alloy B | 316L SST | 316L SST

Alloy 600 | 316L SST | 316L SST

Alloy 400 | 316L SST | 316L SST

Nickel 201 | 316L SST | 316L SST

Alloy 20 | 316L SST | 316L SST

Titanium Grade 4 | Titanium Grade 4 | 316L SST

Titanium Grade 4 | 316L SST | 316L SST

Alloy 22 | 316 SST | 316 SST

Duplex 2507 SST | 316 SST | 316 SST

Zirconium 702 | 316 SST | 316 SST

ANSI/ASME B16.5

EN 1092-1 (European Standard)

JIS (Japanese Industrial Standards)

RFW

Flanged Seal

1 in. | - | 25A

1 1/2 in. | - | 40A

- | DN 25 | -

- | DN 40 | -

1/2 in. | - | -

3/4 in. | DN 10 | -

- | DN 15 | -

- | | 20A

Class 150 | - | 10K

Class 300 | - | 20K

Class 600 | - | 40K

- | PN 40 | -

Class 900 | - | -

Class 1500 | - | -

Class 2500 | - | -

| PN 6 |

| PN 64 |

| PN 100 |

| PN 160 |

316L SST

Alloy C-276

Plated Carbon Steel

304L SST

Titanium Grade 4

Tantalum lined 316L SST (no flushing connection allowed)

Duplex 2505 SST

Alloy 400

1 (1/4-18 NPT)

2 (1/4-18 NPT)

None

1 (1/2-14 NPT)

2 (1/2-14 NPT)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Extra Fill for Cold Temperature Application

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for flushing connection(s)

None

PTFE gasket

Barium Sulfate-filled PTFE gasket

Grafoil® gasket

Ethylene Propylene gasket

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.001 in. (25µm) Gold plated diaphragm

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

None

304 SST Bolts (Only available for Stud Bolt Design)

None

4.1 in. (104mm) Diaphragm Diameter

None

Gasket Surface Ra 125 Max.

ANSI/ASME B16.5

EN 1092-1 (European Standard)

JIS (Japanese Industrial Standards)

EFW

Extended Flanged Seal

3 in. | DN 80 | 80A | 2.58 in. (66 mm)

4 in. | DN 100 | 100A | 3.50 in. (89 mm)

1 1/2 in. | DN 40 | 40A | 1.45 in. (37 mm)

2 in. | DN 50 | 50A | 1.90 in. (49 mm)

3 in. (Headbox) | DN 80 Headbox | - | 2.875 in. (74 mm)

4 in. (Headbox) | DN 100 Headbox | - | 3.780 in. (97 mm)

Class 150 (ANSI)

Class 300 (ANSI)

Class 600 (ANSI)

PN 40 (DIN only)

PN 10/16 (DIN 100 only)

Class 900 (ANSI)

Class 1500 (ANSI)

Class 2500 (ANSI)

PN 64 (DIN)

PN 100 (DIN)

316L SST | 316L SST | 316L SST | 316 SST

316L SST | 316L SST | 316L SST | CS

Alloy C-276 | Alloy C-276 | 316L SST | 316 SST

Alloy C-276 | Alloy C-276 | 316L SST | CS

Tantalum | 316L SST | 316 SST

Tantalum | Tantalum Lined | 316L SST | 316 SST

Duplex 2507 SST | Duplex 2205 SST | 316L SST | 316 SST

Duplex 2507 SST | 316L SST | 316L SST | 316 SST

Alloy C-276 | 316L SST | 316L SST | 316 SST

2 in. (50 mm)

4 in. (100 mm)

6 in. (150 mm)

8 in. (200 mm)

None

0-in. | (PLEASE CONTACT FOR FRACTIONAL EXTENSION LENGTH IF REQUIRED)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Extra Fill for Cold Temperature Applications

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.001 in. (25µm) Gold plated diaphragm

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

None

Smooth Gasket Surface (Ra 125 Maximum)

ANSI/ASME B1.20.1

EN 10226-1 (European Standard)

RTW

Threaded Seal

1/2-14 NPT | -

3/4-14 FNPT | -

1-11.5 NPT | -

1 1/2-11.5 NPT (flushing connection not available) | -

1/4-18 NPT | -

3/8-18 NPT | -

1 1/4-11.5 NPT (flushing connection not available) | -

- | Parallel thread G1/2A DIN 16288

- | Tapered thread R1/2 per ISO 7/1

2500 psi | 172 bar

5000 psi | 344 bar

10000 psi | -

316L SST | 316L SST | CS

Alloy C-276 | 316L SST | CS

316L SST | 316L SST | 316 SST

Alloy C-276 | 316L SST | 316 SST

Tantalum | 316L SST | 316 SST

Tantalum | 316L SST | CS

304L SST | 316L SST | 316 SST

Alloy B | 316L SST | 316 SST

Alloy 600 | 316L SST | 316 SST

Alloy 400 | 316L SST | 316 SST

Nickel 201 | 316L SST | 316 SST

Alloy 20 | 316L SST | 316 SST

Titanium Grade 4 | Titanium Grade 4 | 316 SST

Titanium Grade 4 | 316L SST | 316 SST

Alloy 22 | 316L SST | 316 SST

Duplex 2507 SST | 316L SST | 316 SST

Zirconium 702 | Zirconium 702 | 316 SST

Zirconium 702 | 316L SST | 316 SST

None

316L SST

Alloy C-276

Plated Carbon Steel

304L SST

Titanium Grade 4

Duplex 2205 SST

Alloy 400

None

1 (1/4-18 NPT)

2 (1/4-18 NPT)

1 (1/2-14 NPT)

2 (1/2-14NPT)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

304 SST Bolts

316 SST BOLTS

None

Extra Fill for Cold Temperature Application

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for flushing connection(s)

None

PTFE Gasket

Grafoil® gasket

Ethylene Propylene gasket

Barium Sulfate-filled PTFE gasket

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.0002 in. (5 micrometer) gold plated Diaphragm

0.001 in. (25µm) Gold plated diaphragm

Male NPT process connection threads

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

Hygienic Seal (Conforms to 3-A Standard 74-03)

SCW

Tri-Clover Style Tri-Clamp Sea

1 1/2 in.

2 in.

3 in.

2 1/2 in.

4 in.

316L SST | 316L SST

Not Applicable

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

High Pressure Ladish Clamp and Buna N Gasket

None

Buna-N Gasket

None

Electro polishing

None

10 µ in. (0.25 µm) Ra surface finish

15 µ in. (0.375 µm) Ra surface finish

20 µ in. (0.50 µm.) Ra surface finish

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

Hygienic Seal (Conforms to 3-A Standard 74-03)

SSW

Tank Spud Style

4" Schedule 5 Tri-Clamp, 600 psi (41 bar)

316L SST

Alloy C-276 | 316L SST

2 in.

6 in.

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Tank Spud Included with Shipment

None

Viton® O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)

Buna N O-ring instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

None

0.006 in. (150 µm) Diaphragm thickness

None

Electro polishing

None

15 µ in. (0.375 µ m.) Ra Surface Finish

20 µ in. (0.50 µ m.) Ra Surface Finish

ANSI/ASME B16.5

FCW

Flush Flanged Seal - Ring Type Joint Gasket Surface

2 in.

3 in.

Class 150

Class 300

Class 600

Class 900

Class 1500

Class 2500

316L SST | 316L SST | 316L SST

Alloy C-276 | 316L SST | 316L SST

Duplex 2507 SST/Duplex 2205 SST | 316L SST | 316L SST

None

316L SST

Alloy C-276

Duplex 2205 SST

None

2 (1/4-18 NPT)

1 (1/2-14 NPT)

2 (1/2-14NPT)

None

Extra Fill for Cold Temperature Application

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for Flushing Connection(s)

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.001 in. (25µm) Gold plated diaphragm

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

None

One Piece Design

ANSI/ASME B16.5

RCW

Flanged Seal-Ring Type Joint Gasket Surface

1/2 in.

3/4 in.

1 in.

1 1/2 in.

Class 150

Class 300

Class 600

Class 900

Class 1500

Class 2500

316L SST | 316L SST | 316L SST

Alloy C-276 | 316L SST | 316L SST

Tantalum | 316L SST | 316L SST

Alloy 600 | 316L SST | 316L SST

304L SST | 316L SST | 316L SST

Alloy B | 316L SST | 316L SST

Alloy 400 | 316L SST | 316L SST

Nickel 201 | 316L SST | 316L SST

Alloy 20 | 316L SST | 316L SST

Titanium Grade 4 | Titanium Grade 4 | 316L SST

Titanium Grade 4 | 316L SST | 316L SST

Alloy 22 | 316L SST | 316L SST

Duplex 2507 SST | 316L SST | 316L SST

Zirconium 702 | 316L SST | 316L SST

316L SST

Alloy C-276

304L SST

Titanium Grade 4

Duplex 2205 SST

Alloy 400

None

1 (1/4-18 NPT)

2 (1/4-18 NPT)

1 (1/2-14 NPT)

2 (1/2-14 NPT)

None

Extra Fill for Cold Temperature Application

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for flushing connection(s)

None

0.001 in. (25µm) Gold plated diaphragm

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

None

PTFE gasket

Barium Sulfate-filled PTFE gasket

Grafoil® gasket

Ethylene Propylene gasket

None

4.1 in. (104mm) Diaphragm Diameter

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

ANSI/ASME B1.20.1

EN 10226-1 (European Standard)

HTS

Male Treaded Seal

1-11.5 NPT, 8700 psi (600 bar)-

1 1/2-11.5 NPT, 6000 psi (414)-

2-11.5 NPT, 4000 psi (276 bar)-

-G1, BSP 455 bar (6598 psi)

-G1 1/2, BSP, 400 bar (5800 psi)

-G2,BSP, 280 bar (4060 psi)

LA00

316L SST | 316L SST

None

WR3

3-year limited warranty

WR5

5-year limited warranty

Hygienic Seal (Conforms to 3-A Standard 74-03)

STW

Thin Wall Tank Spud Seal

4" Tri-Clamp, 600 psi (41 bar

316L SST | 316L SST

Alloy C-276 | Alloy C-276

Not Applicable

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

None

Electro polishing

None

15 µ in. (0.375 µ m.) Ra Surface Finish

20 µ in. (0.50 µ m.) Ra Surface Finish

None

Hygienic Seal (Conforms to 3-A Standard 74-03)

EES

Flanged Tank Spud Seal

DN 80, PN 40

DN 50, PN 40

316L SST | 316L SST

Alloy C-276 | 316L SST

25 mm (1 in.)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Viton® O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)

None

Extra Fill for Cold Temperature Applications

None

15 µ in. (0.375 µ m.) Ra Surface Finish

20 µ in. (0.50 µ m.) Ra Surface Finish

None

Electro polishing

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

Hygienic Seal (Conforms to 3-A Standard 74-03)

VCS

In-Line Tri-Clover Style Tri-Clamp Seal

1 in.

2 in.

1 1/2 in.

3 in.

4 in.

LA00

316L SST | 316L SST

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

None

Electro polishing

None

15 µ in. (0.375 µ m.) Ra Surface Finish

20 µ in. (0.50 µ m.) Ra Surface Finish

Hygienic Seal (Conforms to 3-A Standard 74-03)

SVS

Tuchenhagen Varivent compatible Seal

Varivent® Type N DN 40-162

LA00

316L SST | 316L SST

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

None

Extra Fill for Cold Temperature Applications

None

Electro polishing

Hygienic Seal (Conforms to 3-A Standard 74-03)

SHP

Cherry-Burrell "I" Line Style Seal

2 in.

3 in.

AA00

316L SST | 316L SST

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Non-Hygieneic Fill Fluid (Does not conform to 3-A Standard 74)

Hygienic Seal (Conforms to 3-A Standard 74-03)

SLS

Dairy Process Connection- Female Thread

DN 40, PN 40, 304 SST

DN 50, PN 25, 304 SST

LA00

316L SST | 316L SST

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Electro polishing

Non-Industry Standard

WSP

Saddle Seal

2 in. Pipe

3 in. Pipe

4 in. or Larger Pipe

1500 psig at 100 oF (103 bar at 38 oC) eight bolt holes

1250 psig at 100 oF (86 bar at 38 oC) six bolt holes

316L SST | 316L SST

Alloy C-276 | 316L SST

Tantalum | 316L SST

None

316L SST

Alloy C-276

Plated Carbon Steel

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

PTFE Gasket

Grafoil® gasket

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

Non-Industry Standard

UCP

Male Threaded Pipe Mount Seal

PMW

Paper Mill Sleeve

1 1/2-in., Threaded Knurled Nut, 600 psi at 100 F (41 bar at 38C)(UCP only)

1-in., Cap Screw Retainer, 300 psi at 100 F (21 bar at 38 C)(PMW only)

316L SST | 316L SST

Alloy C-276 | Alloy C-276

None

316L SST

Alloy C-276

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

PTFE Coated Diaphragm for nonstick purposes only

Non-Industry Standard

CTW

Chemical Tee Seal

300 psi (21 Bar)

316L SST | 316L SST

Alloy C-276 | Alloy C-276

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

PTFE Coated Diaphragm for nonstick purposes only

ANSI/ASME B16.5

EN 1092-1 (European Standard)

TFS

Wafer Style In-Line Seal

1 in.

1 1/2 in.

3 in.

4 in.

DN 25

DN 40

2 in. | DN 50

DN 80

DN 100

Seal MWP based on customer supplied flange

316L SST | 316L SST

Alloy C-276 | 316L SST

3.54 in. (90 mm)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

ANSI/ASME B16.5

WFW

Flow-Thru Flanged Seal

1 in.

2 in.

3in.

Class 150

316L SST | 316L SST

Alloy C-276 | 316L SST

Tantalum | 316L SST

316L SST

40/40s

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

PTFE O-ring

Grafoil® gasket

Barium Sulfate-filled PTFE gasket

Ethylene Propylene gasket

None

304 SST Bolts

None

Extra Fill for Cold Temperature Application

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

ANSI/ASME B16.5

EN 1092-1 (European Standard)

PFW

Pancake seal

2 in. | DN 50 | 50A

3 in. | - | 80A

NA | DN 80| NA

None, Seal Rated to 6250 psi or Flange Rating | -

Class 150 | - | 10K

Class 300 | - | 20K

Class 600 | - | 40K

- | PN 40 | -

Class 900 | - | -

Class 1500 | - | -

Class 2500 | - | -

- | PN 63 | -

- | PN 100 | -

316L SST | 316L SST | None

316L SST | 316L SST | CS

316L SST | 316L SST | 316 SST

Alloy C-276, seam welded | 316L SST | None

Alloy C-276, seam welded | 316L SST | CS

Alloy C-276, seam welded | 316L SST | 316 SST

Tantalum, Seam Welded | 316L SST | None

Tantalum, Seam Welded | 316L SST | CS

None

316L SST

Alloy C-276

None

One (1/4-18 NPT)

Two (1/4-18 NPT)

One (1/2-18NPT)

Two (1/2-18NPT)

None

WR3

3-year limited warranty

WR5

5-year limited warranty

None

Extra Fill for Cold Temperature Applications

None

Alloy C-276 Plug(s) for flushing connection(s)

316 SST Plug(s) for flushing connection(s)

316 SST vent/drain for flushing connection(s)

None

PTFE gasket

Grafoil® gasket

None

Wetted Materials Compliance to NACE MR 01-75/ISO 15156, MR0103

None

0.006 in. (150 µm) Diaphragm thickness (available with 316L SST, Alloy C-276 and 2507 Duplex SST for abrasive applications)

None

PTFE Coated Diaphragm for nonstick purposes only (316L SST and Alloy C-276 diaphragms only)

0.001 in. (25µm) Gold plated diaphragm

0.0002 in. (5 micrometer) gold plated Diaphragm

0.0006 in. (15 micrometer) gold plated Diaphragm

None

Smooth Gasket Surface (Ra 125 Maximum)